Basement water

Basement Water: Leaks, Seepage and Dampness

Updated

Quick answers

Where is the water coming from?

What you seeLikely source
A wet line running down the wallA crack in the wall
Rust-stained drips from round holesLeaking tie rod holes
Water along the base of the wallThe joint where floor meets wall
Water coming up through the floorWater under the slab
Beads of water on a cold wall in summerCondensation, not a leak
White, chalky crustWater that came through and dried

That white crust is efflorescence. The K-State Extension describes it as salt deposits left when water evaporates from concrete, so it is a map of where water has been.

What should you do today?

Move anything you care about off the floor and dry the area. The EPA says wet materials should be dried within 24 to 48 hours to prevent mold. A fan and a dehumidifier make a big difference.

Then step outside. Clear the gutters and point the downspouts away from the wall. Our guide to water coming through the wall has the full first-day checklist.

How do you stop it for good?

Two things, usually together:

  1. Send less water to the wall. Clean gutters, extend downspouts and fix soil that slopes toward the house.
  2. Seal the openings. A leaking crack in a poured wall can be sealed from inside with foam injection. The DIY crack injection walkthrough shows how.
Spring rain running off a roof into a gutter and downspout beside a flowering tree
Roof water is the biggest source of water against most basement walls.

Is the crack itself a problem?

Most leaking cracks are simple shrinkage cracks. A few are signs the wall is moving. Before you seal one, take the 60-second crack quiz or read our overview of which foundation cracks are serious.