Crack repair kits FAQ

Can you inject a foundation crack while it is wet?

Updated

Yes for the foam, no for the paste. Concrete Sealers USA says its foam adheres wet or dry, while its epoxy paste is not meant for wet surfaces. Wait for a dry spell, or dry the face of the wall, before you paste the ports on.

Why does wet matter for the paste?

The epoxy paste holds the ports on and seals the crack face so foam goes in, not out. The manufacturer says the surface must be dry and free of dirt, dust or debris, and that putting the paste on wet surfaces is not recommended. Paste on a damp wall can let go under pressure.

Why is the foam fine with water?

The foam is hydrophobic (it pushes water out of the way as it expands). Concrete Sealers USA says it adheres wet or dry, so moisture deep in the crack is not a problem once the face is sealed.

How do you get a dry enough wall?

  • Wait for a few dry days after rain or snowmelt.
  • Run a dehumidifier or fan at the wall the day before.
  • Wire-brush and vacuum the crack face, then wipe it dry right before pasting. The prep steps in our injection guide cover this in detail.

If water is actively running down the wall, sort out where the water is coming from first and come back when it slows.

Full guide: How to Fix a Leaking Foundation Crack Yourself, Step by Step

Related questions

All crack repair kits questions