Quick answers
Which repair methods are there?
| Method | Where it works | Holds against water? | DIY? |
|---|---|---|---|
| Polyurethane foam injection | Leaking cracks in poured walls | Yes, fills the crack depth | Yes, with a kit |
| Epoxy injection | Dry cracks that need bonding | Not for active leaks | Rarely |
| Hydraulic cement patch | Plugging a hole in a hurry | Often cracks out again | Yes |
| Paint-on waterproof coating | Damp walls, not open cracks | Not over a moving crack | Yes |
| Exterior excavation and membrane | Many leaks on one wall | Yes | No |
Our comparison of every way to fix a foundation crack walks through each one, with cost and when it makes sense.
Why does injection beat a surface patch?
A patch sits on the face of the wall. Water still fills the crack behind it and pushes. Concrete also moves a little with the seasons, so a rigid patch can crack along its edges.
Injection fills the crack from the inside face toward the soil. The foam expands and stays flexible, so it moves with the wall. That is why a kit like the one in our kit review is built around foam, not cement.
When is digging outside the better choice?
When many cracks or the whole wall leak, or the outside waterproofing has failed. It can also make sense if the wall is about to be finished and you want a membrane on the outside. For a single vertical crack, it is usually the most expensive way to get the same result.
When is no repair the right call?
When the crack is structural. Horizontal cracks, bowing walls and offset cracks need a structural engineer first, because sealing them can hide movement. The crack check quiz sorts that out in about a minute.